Alumagrips

______View a larger picture_______


AlumaGrips Logo Shirts "NEW"

$65.00 per set
These logo shirts are a TechWearUSA product. The shirts are light, breathable, and moisture wicking - more a piece of equipment than just a shirt. Your shirt will drip dry in a few hours, provide twice the life of a regular cotton shirt, and the colors remain crisp and vibrant.




Single Stack Magwells "NEW"
Three different sizes for three different applications. All IDPA and USPSA Legal In stock and available for immediate delivery

Watch a TechWell Installation Video

Watch a TechWell Tuning Video

Blued Slimline Hex Screws & Bushings

$13.45 per set
Replacement package of four short screws and bushings for use with Slim Grips. Hex head screws look great and prevent ragged looking screws. Polished Blue finish. These screws seat well below the top surface of the grips
Blued Slimline Hex Screws Only

$9.95 per set
Replacement package of four short blued steel screws for use with Slim Grips. Hex head looks great and prevents ragged looking screws. These screws seat well below the top surface of the grips. Order these if you only need slimline screws
Blued Slimline Hex Bushings Only

$4.50 per set
Replacement package of four short blued bushings for use with all Slim Grips. Due to the very shallow screwdriver slot in the top of the slimline bushings the use of a slimline bushing tool is recommended for installation and removal from the 1911 frame. Order these if you only need slimline bushings
S/S Slimline Hex Screws & Bushings

$14.95 per set
Replacement package of four short screws and bushings for use with Slim Grips. Hex head looks great and prevents ragged looking screws. These screws seat well below the top surface of the grips
S/S Slimline Hex Screws Only

$10.50 per set
Replacement package of four short stainless steel screws for use with Slim Grips. Hex head looks great and prevents ragged looking screws. These screws seat well below the top surface of the grips. Order these if you only need slimline screws
S/S Slimline Hex Bushings Only

$4.95 per set
Replacement package of four short stainless steel bushings for use with all Slim Grips. Due to the very shallow screwdriver slot in the top of the slimline bushings the use of a slimline bushing tool is recommended for installation and removal from the 1911 frame. Order these if you only need slimline bushings
Oversized Slimline Bushings

$15.00 per set
Replacement package of 2 oversized short bushings, tap not included, for use with Slimline grips when the frame threads have been stripped or crossthreaded. Brownells P/N for the oversized tap is 080-598-225. Polished Blue finish. AlumaGrips can also supply a loaner tap for a additional $45.00 fee. $25.00 refunded when the tap is returned. Please call and make arrangements for the use of our tap 602-294-2390
Slim Bushing Tool

$9.75 each

A special tool that is designed to correctly center the blade and fully support 1911 slimline bushings. Makes removal easier, faster and prevents tearing up the slot.

SPECS: 1/4" male hex drive

Full Size Frame Savers

$2.50 per set
The Frame Saver is a product AlumaGrips developed that will keep the finish on your frame in good condition no matter what type of grips you use. The fullsize Frame Saver will fit all full size frames including bobtail, and frames with ambi safeties. Frame Savers are only .005" thick and made of a durable and solvent resistant type material.
Compact Size Frame Savers

$2.50 per set
The Frame Saver is a product AlumaGrips developed that will keep the finish on your frame in good condition no matter what type of grips you use. The Compact Size Frame Saver will fit all compact and officer size frames with or without the ambi safety. Frame Savers are only .005" thick and made of a durable and solvent resistant type material.
Standard Length Blued Hex Screws

$9.00 per set of 4

Give positive purchase for removing grip screws and prevents damaged, ragged-looking grips and screws.

SPECS: 150"-50 x .250" tpi
Standard Length S/S Hex Scews

$9.75 per set of 4

Give positive purchase for removing grip screws and prevents damaged, ragged-looking grips and screws.

SPECS: 150"-50 x .250" tpi

Standard Length Blued Stock Bushings

$7.00 per set

Nicely made with a blue finish, these "Made to Original Factory Spec Bushings" are packed in sets of 4 Bushings.

SPECS: .236"-60 thread
Standard Length S/S Stock Bushings

$10.00 per set

Nicely made from Stainless Steel, these "Made to Original Factory Spec Bushings" are packed in sets of 4 Bushings.

SPECS: .236"-60 thread
Standard Length Blued Slotted Screws

$7.50 per set of 4

Factory replacement screws. Just like the old days.

SPECS: 150"-50 x .250" tpi
Standard Length S/S Slotted Scews

$8.00 per set of 4

Factory replacement screws with a polished and slotted head.

SPECS: 150"-50 x .250" tpi

Standard Length Bushing Tool

$9.75 each

A special tool that is designed to correctly center the blade and fully support 1911 standard length bushings. Makes installation and removal easier, faster and prevents damage to the slot.

SPECS: 1/4" male hex drive

Loctite

$2.25 each

This Loctite is designed to be used specifically on screws under 1/4" diameter where repeated installation is an option. Loctite 222 should only be used on grip screws to keep them from " shooting loose". This is not designed to be used on the bushings. There is enough loctite in this reusable dispenser to secure approximately 8 screws.

SPECS: Purple



Blued Ambi Safety

$59.75

Contoured and shaped to eliminate sharp edges and bulk for comfortable carry. Improves feel and operation for use in competition. Extra long, serrated pads curve to fit thumb, provide quick, easy reach and non-slip contact.

Specs: 3/16" (4.8mm) wide x 1" (2.5cm) long left side contact area, 1/8" (3.2mm) wide x 1" (2.5cm) long right side contact area.
S/S Ambi Safety

$59.75

Gracefully curved, grooved, extended safety for the 1911 and its copies makes this fine gun even better. Left and right handers benefit from the extra length - it's easier to find and release - while the ambidextrous feature makes "weak hand" shooting simpler. Beautifully contoured and finished, a first class addition to any 1911. Slightly oversized sear stud allows precise gunsmith fitting.

Specs: 3/16" (4.8mm) wide x 1" (2.5cm) long left side contact area, 1/8" (3.2mm) wide x 1" (2.5cm) long right side contact area.
Blued Extended Slide Release

$30.00

Manufactured by Wilson Combat, this blued slide release is wider and longer than the factory lever so the shooter can keep his eyes on the target during magazine changes. Reduces recovery time greatly. Serrated grooves for no-slip grip.Makes fast manipulation of the slide release possible without changing your grip when speed loading (.45 ACP). May require minor fitting on some guns.

SPECS: 1-1/8" (2.8cm) long x 3/16" (4.8mm) wide contact area. Matte finish.
S/S Extended Slide Release

$35.00

Manufactured by Wilson Combat, this stainless steel slide release is wider and longer than the factory lever so the shooter can keep his eyes on the target during magazine changes. Reduces recovery time greatly. Serrated grooves Makes fast manipulation of the slide release possible without changing your grip when speed loading (.45 ACP). May require minor fitting on some guns.

SPECS: 1-1/8" (2.8cm) long x 3/16" (4.8mm) wide contact area. Matte finish
Standard Smooth
Standard Checkered
Deluxe Checkered
Custom Deluxe
Custom Accesories